Title: Health and Safety at Work etc. Act 1974

    Code No: HS01

    Content:

The course outlines the purpose of the 'Act' and examines the implications for employers, employees and self-employed and highlights responsibilities of managers and supervisors. Practical guidance to the regulations is provided with case studies.

    Objectives: 

On completion of the course participants will be able to:

• outline the purpose of the 'HSWA 1974
• identify the duties of manufacturers
• identify the duties placed upon persons with regard to their work status (employer, employee etc.)
  
• recognise the key issues; e.g. approved methods of assessments, provision of information and training, the requirement for developing 'Safe Systems of Work', control of emissions
  
• complete required documentation for recording incidents and accidents

    Prerequisites: 

None

    Participants: 

Open; e.g. Health and Safety representatives, employers, employees

    Duration: 

1 day

Title: EC Safety Legislation - 'Six Pack'

    Code No: HS02

    Content: 

The course outlines the purpose of the legislation and provides an overview of the six regulations that comprise the 'EC Health and Safety Regulations' introduced in '93.

1. The Provision and Use of Work Equipment Regulations (PUWER) 1998
2. The Personal Protective Equipment at Work (PPE) Regulations 1992
3. The Workplace (Health, Safety and Welfare) Regulations 1992
4. The Manual Handling Operations Regulations 1992
5. The Management of Health and Safety at Work Regulations 1999
6. The Health and Safety (Display Screen Equipment) Regulations 1992

    Objectives: 

On completion of the course participants will be able to:

• outline the purpose of the 'Six Pack' legislation
• identify the duties placed upon persons with regard to their work status (employer, employee)
• recognise the key issues associated with each of the six regulations

    Prerequisites:

None

    Participants: 

Open; e.g. Health and Safety representatives, employers, employees

    Duration:

1 day

Title: Portable Appliance Testing

   Code No: HS03

    Content:

From the Electricity at Work Regulations 1989, Regulation 4 - Systems, Work Activities and Protective Equipment, there is a requirement for safe systems of work relating to the use and maintenance of electrical systems.

Although ‘PAT’ is not a specific legal requirement under this regulation, it is recognised as meeting the requirement as part of a maintenance regime, to ensure electrical devices do not become dangerous.

The course provides an overview of the legal responsibilities and requirements, their purpose, and definitions and provides practical exercises in testing portable electrical equipment.

The course can be modified to suit any level of PAT as follows:
        1. User Visual Inspection (e.g. suitable for office staff, cleaning staff etc.)
        2. Formal Visual Inspection (e.g. suitable for stores staff, college technicians)
        3. Combined Inspection and Testing and In-Service Tests (e.g. for electrical maintenance)

    Objectives:

On completion of the course participants will be able to:

• demonstrate an awareness of the employer's/employees legal responsibilities
• interpret relevant definitions associated with PAT and single phase electrical supplies
• recognise potential hazards arising from faulty electrical equipment
• complete inspection and testing of portable appliances to required level
• identify faults to the required level;
  - external damage
  - internal damage
  - signs of over heating
  - fuse rating
  
• identify frequency of tests based on use, application and working environment
• use selected test equipment correctly
• adopt a recording and reporting system (paper or PC based)

    Prerequisites:

Dependant on level required i.e. none for Visual Inspection, but knowledge of basic electrical principles for Combined Inspection and Testing and In-Service Tests.

    Participants:

Open; but specifically aimed at those responsible for maintenance/testing of portable electrical equipment.

    Duration:

Half day for Visual Inspection to 1 day for Combined Inspection and Testing

Title: Electrical Safety Basics

   Code No: HS04

    Content:

The course provides comprehensive information about electrical and related legislation (HASWA, EAW, BS7671, MHSAW), the cause and effects of electric shock, dealing with a shock victim, identification of hazards, identification of voltage bands, power and control voltages, function of RCD's and isolators and practical examples of isolation and lock-out procedures using recommended test equipment.

The content is provided through lecture, video and practical exercises.

NB: This course has been devloped on request from a client, to update/refresh their electrical maintenance personnel and technicians who regularly need to access cabinets containing a range of supply voltages.

    Objectives:

On completion of the course participants will be able to:
• demonstrate awareness of the legal requirements regarding electrical safety 
• identify the cause and physiological effects of electric shock
• demonstrate practical action of dealing safely with a shock victim
• interpret safety and electricity related terminology
• demonstrate understanding of phases, voltage bands and equipment class
• identify power and control voltage supplies
• identify function/action of RCD's and isolators
• identify recommended test equipment types (GS38)
• demonstrate safe working practice using isolation and lock-off

    Prerequisites:

None

    Participants:

Open; although specifically designed for electrical supervision/maintenance personnel/technicians

    Duration:

Half to one day - depending on amount of practical work to be included.

Title: IEE Wiring Regulations 17th Edition

   Code No: HS05

    Content: 

The course provides a comprehensive review of the ‘IEE Wiring Regulations 17th Edition’
(BS7671:2008) structure, including practical application examples covering electrical supply systems, protection from electric shock, sizing of conductors, conduits and trunking, earthing requirements, selection of electrical equipment, inspection and testing and other related subjects.

Example C&G test papers are used throughout to ensure comprehension of subject matter.

NB:   This course includes an on-line, open book exam, and on successful completion qualify for:

                Full course: City & Guilds 2382-10 Certificate

                Update course: City & Guilds 2382-20 Certificate (see prerequisites).

    Objectives:

            On completion of the course participants will be able to:

            • demonstrate awareness of employer/employee responsibilities regarding electrical installations
            • outline the purpose of the IEE Regulations 16th Edition
            • assess and plan work within the scope of the regulations
            • identify systems for protection against electric shock and over current
            • calculate correct sizes and ratings of electrical conductors/equipment
            • complete correct earthing, bonding, isolation and switching procedures
            • complete inspection and testing of all circuit components
            • sit the C&G 2382-10/20 open book online exam

   
    Prerequisites: 
       
        Working knowledge of electrical principles, for both courses.

        To sit the C&G 2382-20 exam (update course), candidates must hold a valid C&G2381 certificate
        (16th Edition)
   

    Participants: 

        Open: practicing electricians, those requiring Part P and NECIEC accreditation.

    Duration:

       C&G 2382-10; 4 days (full course) including exam.  Cost £475.00 + VAT

       C&G 2382-20; 2 days (update course) including exam.  Cost £275.00 + VAT

Title: Asbestos Awareness (CAW Regs. 2006)

   Code No: HS06

    Content: 

The Control of Asbestos at Work Regs. 2006, Regulation 10, imposes a duty on any person who is liable to disturb asbestos during their work activity, or those who influence how such work is executed, to receive 'Asbestos Awareness' training. This course is designed to meet this requirement.

The content outlines the current regulations relating to Asbestos i.e.
1.   The Control of Asbestos at Work Regs. 2006
2.    The Asbestos Licensing Regs. 1983
3.    The Construction Design and Management Regs. (CDM) 2007

This includes approved codes of practice (ACOP).

In addition to the legislation, the course gives practical guidance on identifying Asbestos types and materials containing Asbestos, associated risks to health from exposure, including decontamination, management and disposal.

Examples of job types that may need to comply with CAW 2006
Building maintenance staff, electricians, plumbers, gas fitters, painters/decorators, joiners, plasterers, demolition/construction workers, shop fitters, roofers, heating/ventilation/telecommunication engineers, fire/burglar alarm installers, computer network installers, architects, building surveyors.

    Objectives: 

On completion of the course participants will be able to:
• outline the purpose of the regulations
• identify the classifications of Asbestos
• identify materials containing Asbestos
• identify the duties placed upon persons with regard to their work status
• demonstrate an awareness of the key issues i.e.
   - assessment and notification of work
    - approved methods of managing and disposal ofAsbestos
    - protective clothing and equipment
    - designated areas
    - washing / changing facilities and decontamination

    Prerequisites: 

None

    Participants: 

Open; e.g. Health and Safety representatives, management, demolition and building maintenance operatives

    Duration:

1 day

Title: Woodworking Machine Regulations 1974

   Code No: HS07

    Content:

The course provides an explanation of the current legislation with regard to persons operating woodworking machinery, covering their responsibilities, safe setting and use of the machinery and safety equipment.

    Objectives:

On completion of the course participants will be able to:

• outline the purpose of the regulations
• identify their responsibilities in regard to the regs.
  
• execute correct and safe machine adjustmentand setting
  
• demonstrate awareness of the requirements for personal protective equipment
  
• demonstrate awareness of the requirements for a safe working area e.g. cleanliness, lighting, dust extraction, materials handling

    Prerequisites:

None

    Participants:

Open

    Duration: 

1 day

Title: Safe Use of Abrasive Wheels (PUWER'98)

   Code No: HS08

    Content: 

The course outlines the current legislation (PUWER'98/revoked AWRegs. 1970) with regard to those persons whose work involves the replacement of abrasive wheels and maintenance of grinding machinery.

The course also incorporates related legislation regarding PPE (Personal Protective Equipment) and COSHH (Control of Substances Hazardous to Health).

Theory and practice are provided on identification, selection, mounting and dressing of abrasive wheels, as required, and include practical examples of correct use.

The course duration can be adapted for people required to operate only portable equipment, such as angle grinders (grinding and cutting wheels) or can include setting of fixed grinding machines i.e. 'Off Hand', Horizontal, Cylindrical grinders.

    Objectives: 

On completion of the course participants will be able to:
• demonstrate awareness of their responsibilities with regard to 'Abrasive Wheels' PUWER'98
• identify hazards associated with abrasive wheels
• interpret wheel identification markings
• select correct wheel compound in relation to job material
• inspect and test wheels for 'soundness'
• correctly balance an abrasive wheel
• correctly mount and dress an abrasive wheel
• correctly handle, store and transport abrasive wheels

    Prerequisites: 

Should be familiar with grinding machines and methods.

    Participants:

Open; e.g. persons responsible for mounting abrasive wheels and maintaining grinding machines.

    Duration: 

1 day

  Title: Safe Use of Lifting Equipment (LOLER'98)

   Code No: HS09

    Content:

The course outlines the current regulations, with reference to MHSAW and PUWER, and provides both practical and theoretical examples in assessing weight estimations, safe working practice, selection of correct equipment and duties of persons responsible for 'Slinging and Lifting'.

Practical examples are used throughout the training.

    Objectives: 

On completion of the course participants will be able to:
• estimate weights and 'centre of gravity' of a load
• select the best/safest method of slinging and lifting
• identify safe working loads, working load limits and factors of safety
• recognise and use the correct signaling procedures
• identify methods of protecting equipment, slings and loads
• correctly select, inspect and store slinging and lifting equipment

    Prerequisites: 

None

    Participants: 

Open

    Duration: 

2 days

Title: Robot Safety  

    Code No: HS10

Fortec can develop 'Safe Systems of Work' and a 'company certification' system for employees working with any robot installation(s).

    Content: 

The course covers terminology associated with robot safety and outlines the risks and hazards associated with working on robot systems in different modes (e.g. maintenance, programming, production). In addition the course considers legal requirements, EN standards used in the design of mechanical/electrical machinery and in particular 'Safe Systems of Work' for autoline guarding and individual robot cells.

    Objectives: 

On completion of the course participants will be able to:
• demonstrate an awareness of potential hazards associated with robots
• recognise the safeguards used to protect them while working with robot systems
• demonstrate an awareness of employers and employees responsibilities in relation to
    'Safe Systems of Work' Health and Safety at Work
• operate 'lock-off' and 'safe entry' procedures (if applicable)

    Prerequisites: 

None

    Participants: 

Open; e.g. Health and Safety representatives, persons who are required to work with robot systems or may be required to enter robot/automated stations.

    Duration: 

Half day minimum; but can be extended to 1 day if practical demonstration on robot systems is required.

Title: Risk Assessment (Management of H&S at Work'99)

    Code No: HS11

    Content:

As part of the 'EC Health and Safety Regulations',  introduced as approved codes of practice (ACOP), the section 'Management of Health and Safety at Work 1999' requires the incorporation of Risk Management.

This course outlines the legal resopnsibilities, the principles of risk assessment, how to identify and evaluate potential hazards and procedures to establish and maintain risk assessments as part of a H&S and maintenance regime.

The course is delivered through lecture and case studies and can include practical examples on actual work equipment, as required.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness of the principles of the approved codes of practice (ACOP)
• demonstrate awareness of the legal responsibilities related to those making 'Risk Assessments'
  
• employ a systematic approach to reviewing work activity in order to implement hazard analysis
  
• assess levels of risk and identify appropriate action evaluate, record and improve, where necessary, existing control measures
  
• establish a procedure to review, maintain and establish safety procedures on a regular basis

    Prerequisites:

None

    Participants:

Open; e.g. persons responsible for company health and safety policy, management , supervision or maintenance of equipment installation

    Duration: 

1 day

Title: Safe Use of Power Presses (PUWER'98)

   Code No: HS12

    Content:

 In accordance with the 'Provision and Use of Work Equipment Regulations '98' the following topics are required to be given as training elements to personnel operating any machine deemed to be a Power Press.

1.    Power Press mechanisms, their function and safety related information
2.    Function of safety devices and guards and other protective devices
3.    Accident causes and preventive measures
4.    Safe methods of working regarding tool setting and maintenance
5.    Tool design in relation to safe systems of work
6.    Inspection/testing of guards, protective devices and identifying defects

    Objectives:

On completion of the course participants will be able to:

• demonstrate an awareness of the legal responsibilities related to the use of power presses
• state the working principles of power press mechanisms including clutch, flywheels and brakes
• demonstrate an awareness of typical accident causes and preventive measures
• recognise the importance of developing safe systems of work for operation, tool setting and maintenance

    Prerequisites:

None

    Participants:

Open;  e.g.  persons responsible for  company health and safety policy, supervision or maintenance of equipment installation

    Duration:

1 day

It is a specific legal requirement under the Factories Act 1961, for those persons undertaking the adjustment and inspection of power press safety devices to be trained in accordance with the schedule.
This course (min. one day) complements the above course with practical experience that is necessary in order to become an Appointed Person under the Power Press Regulations. Please phone for details.

Title: Display Screen Equipment Safety

   Code No: HS13

    Content:

 In accordance with European Directive 90/270/EEC the 'Health and Safety (Display Screen Equipment) Regulations 1992' were introduced under the provision of the Health and Safety at Work Act 1974.

The training is designed to reduce musculoskeletal problems, visual difficulties and mental stress associated with long term use of DSE and provides definition of terms of ‘equipment’ and ‘users’ relating to DSE and covers topics relating to work environment, office equipment, work stations, employer/employee responsibilities.  

    Objectives:

On completion of the course participants will be able to:

•    demonstrate an awareness of the legal responsibilities related to employer/employee
•    state the definitions of related equipment and environment issues
•    identify risk of Repetitive Strain Injury (RSI) and Work Related Upper Limb Disorders
•    demonstrate an awareness of good posture, sensible layout, screen maintenance, lighting and activity breaks

    Prerequisites:

None

    Participants:

Open;  e.g.  persons responsible for  company health and safety policy, management, supervision, display screen users

    Duration:

1 day

Title: Construction (DM) Regulations 2007

   Code No: HS14

    Content:

    Objectives:

On completion of the course participants will be able to:
•    demonstrate an awareness of the legal responsibilities of:
    - clients and clients agents
    - planning supervisors
    - principal contractors
    - contractors
    - designers
•    state the working definitions associated with the 19 regulations
•    execute a Health and Safety Plan

    Prerequisites:

None

    Participants:

Open; but specifically aimed at construction or building maintenance supervisors/management, construction company health and safety policy.

    Duration:

1 day

Please note:    A CDM course, 'Managing H&S in Construction' is available to provide more comprehensive information for CDM Coordinators, to include Common Law, risk assessment, ACOP’s, Safe Systems of Work, hazards in construction and other related subjects.

Please call 01702 217767 for further information

Title: The Provision and Use of Work Equipment Regulations 1998 (PUWER'98)

   Code No: HS15

    Content: 

The course outlines the current approved codes of practice (ACOP) and practical guidance to the regulations to include interpretation and scope of application for employers, employees, contractors, subcontractors and self-employed.

    Objectives:

On completion of the course participants will be able to:

• outline the purpose of the regulations
• interpret the expressions contained in the regulations
• identify the classifications of 'work equipment'
• identify the duties placed upon persons with regard to their work status
• recognise the key issues; e.g. approved methods of assessments, record keeping, training
• relate to relevant British Satndards (BS) and harmonised European Standards (EN) regarding product quality (CE marking)

    Prerequisites: 

None

    Participants: 

Open; e.g. Health and Safety representatives, management and supervisors, production and maintenance personnel

    Duration: 

1 day

Title: Legionnella - Prevention and Control

   Code No: HS16

    Content:

Legionnaires' Disease, recognised in 1976, is a form of pneumonia caused by the inhalation of bacteria carried in fine water droplets.  The infection is usually associated with large premises such as hospitals, hotels and factories and use of cooling towers and evaporative condensers.

Firstly, the course examines the history behind the infection, symptoms of Legionniares' disease, associated statistics, and employer's legal responsibilities under the Health and Safety Act 1974.

This is followed by how and where the Legionnellae bacteria colonise, the conditions for proliferation and Approved Codes of Practice (ACOP's) for prevention and control.

    Objectives:

On completion of the course participants will be able to:

•    demonstrate an awareness of the employer's legal responsibilities
•    interpret relevant definitions associated with Legionellosis
•    recognise potential hazards arising from water treatment plant
•    recognise good engineering practice related to design, construction, operation and maintenance of water treatment plant
•    adopt ACOP's to prevent or control infection from Legionnellae bacteria

    Prerequisites:

None

    Participants:

Open; but specifically aimed at those responsible i.e. management and supervision, for operation and maintenance of large premises.

    Duration:

1 day

Title: Safe Work in Confined Spaces

   Code No: HS17

    Content:

The 'Management of Health and Safety at Work Regs. 1999' require employers to carry out risk assessments of all risks associated with work activities.  Work in confined spaces is potentially hazardous and precautions, defined in the 'Confined Spaces Regulations 1997' are necessary to ensure employees are not at risk.

Firstly, the course provides necessary associated definitions; what is a confined space, free flowing solids, risks, systems of work, and examines each regulation in turn.

This is followed by approved codes of practice (ACOPS) related to written safety plans, hazard identification, permits to work, unauthorised entry, confined space testing, rescue facilitation and information and policies for contractors.

    Objectives:

On completion of the course participants will be able to:
•    demonstrate an awareness of the employer/employee legal responsibilities
•    interpret relevant definitions associated with confined spaces
•    recognise potential hazards arising from working in confined spaces
•    identify arrangements and procedures for emergency rescue
•    adopt ACOP's to prevent risk to persons working in confined spaces

    Prerequisites:

None

    Participants:

Open; but specifically aimed at those responsible (i.e. management and supervision), for site services operation, maintenance and contractors and persons required to work in confined spaces.

    Duration:

1 day

Title: Receiving Bulk Liquids Into Storage Tanks

   Code No: HS18

    Content:

The course covers the hazards of dangerous substances, the United Nations’ system of identification covering dangerous goods and specifically the functions and duties of a designated ‘competent person’ for the purpose of receiving petroleum

    Objectives:

On completion of the course participants will be able to:

• the dangers exhibited by compressed gasses, flammable liquids, flammable solids, oxidising agents and corrosives
• the actions and procedure to be followed when receiving bulk liquid loads into the site
• their responsibilities and actions required by the 'Carriage of Dangerous Goods' schedules for delivery into licensed petroleum sites
• execute safe procedures in the event of an emergency or spillage, including protection of the environment

    Prerequisites:

None

    Participants:

Open

    Duration:

1 day

Title: The Control of Substances Hazardous to Health Regulations 2002 (COSHH)

   Code No: HS19

    Content:

The course outlines the current approved codes of practice (ACOP) and practical guidance to the regulations to include interpretation and scope of application for employers, employees, contractors, sub-contractors and self-employed.

This highlights the 5 categories of hazardous substances, the need for assessment of health risks, prevention or control, monitoring, the provision of instruction and training and miscellaneou provisions.

    Objectives: 

On completion of the course participants will be able to:

• outline the purpose of the regulations
• interpret the expressions contained in the regulations
• identify the classifications of hazardous substances
• identify the duties placed upon persons with regardto their work status
• recognise the key issues; i.e.
- approved methods of monitoring and controlling
- protective equipment
- health surveillance
- instruction and training

    Prerequisites: 

None

    Participants: 

Open; e.g. Health and Safety representatives, management, supervision

    Duration: 

1 day

Title: Basic Priciples of Ergonomics

   Code No: HS20

    Content:

The course outlines the definition and basic principles of Ergonomic issues, related to general applications and especially to the office environment.

A review of typical physiological conditions and potential problems relating to back, eyes, and wrists is covered, along with setting up a typical office workstation and the ‘pros and cons’ of ergonomically designed equipment.

In addition it also provides a brief overview of the six regulations that comprise the ‘EC Health and Safety Regulations’ introduced in ’93, that can be related to ergonomic issues e.g. The Personal Protective Equipment at Work (PPE) Regs. 1992; The Manual Handling Operations Regs. 1992; The Management of Health and Safety at Work Regs. 1999; The Health and Safety (Display Screen Equipment) Regs. 1992

The course is provided through lecture and video.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness of the requirements of relevant legislation
  
• define the basic principle of ergonomic applications
• identify typical ergonomic issues in the workplace
• demonstrate an awareness of the key issues relating to:
• demonstrate application of single and dual person lifts
  - eye strain and lighting
  - back pain and posture
  - repetitive strain syndromes (wrist and hand)
  
• define setup of office equipment through ‘risk assessment’

    Prerequisites:

None

    Participants:

Open - H&S reps., staff, management; Maximum of 8

    Duration:

1/2 day to 1 day depending on equipment and type of work involved (e.g half day, office staff)

Title: Work at Height - Fall Arrest Equipment

   Code No: HS21

    Content:

The course outlines the requirements of the 'Work at Height Regulations 2005' and the system of hierarchy. This incorporates definitions, what is work at height, the basic principles of safe working at height and the use of fall arrest equipment.

Also includes background statistics and general applications in the demolition and construction environment.

Practical sessions include the inspection of fall arrest equipment.

The course is provided through lecture and video.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness of the health and safety issues when working at height
• understand the risks and controls needed to prevent death or serious injury
• how to reduce risk to a tolerable level
• summarise practical issues of working at height and use of personal protective equipment
• demonstrate an awareness of safe systems
• carry out daily inspections of equipment and recognise faults
• develop a reporting system/log of equipment status

    Prerequisites:

None

    Participants:

Open - H&S reps., demolition operatives, scaffold erectors, staff, management; Maximum of 8

    Duration:

1/2 day to 1 day depending on equipment and type of work involved

Title: Demolition Operative Safety Awareness

   Code No: HS22

    Content:

The course includes a review of all tasks relevant to demolition and the relevant legislative requirements for compliance with regulations.

A brief of the following topics is included:
Manual Handling; Working at Heights; Safety in Excavations; Electrical Safety; First Aid / Accident reporting; Asbestos; Fire Safety; Personal Protective Equipment; Noise at Work; Vibration at Work; Safe use of Plant / Equipment; Control of Substances Hazardous to Health; Health & Hygiene; Housekeeping; Safety Signs and Signals; Public Safety; Environmental considerations

The course is provided through lecture and video.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness of employer/employee responsibilities regarding H&S
• demonstrate awareness of the health and safety issues related to demolition work sites
• understand the risks and controls needed to prevent death or serious injury
• how to reduce risk to a tolerable level
• summarise practical issues of safe work e.g manual handling, heights, excavations, PPE
• demonstrate an awareness of need for safe systems
• carry out inspections of equipment and recognise faults
• recognise the need to develop and manage a safe working environment

    Prerequisites:

None

    Participants:

Open - H&S reps., demolition operatives, staff, management; Maximum of 8

    Duration:

1/2 day to 1 day depending on equipment and type of work involved

Title: Manual Handling

   Code No: HS23

    Content:

The course provides an appreciation of human anatomy and physiology relating to the causation of injury and preventive measures that can be adopted.
Reference is also made to injury statistics and Manual Handling Operations Regulations 1992.

Techniques of safe manual handling of difficult loads and awkward situations are taught through lecture and practical exercises.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness of the requirements of relevant legislation
  
• identify potential hazards associated with manual lifting
• recognise limitations of manual lifting
• adopt the principles of safe manual handling techniques
• demonstrate application of single and dual person lifts
  

    Prerequisites:

None

    Participants:

Open - Maximum of 8

    Duration:

1/2 day to 1 day depending on equipment and type of work involved (e.g. office work; 1/2 day)

Title: Scaffold Inspector

   Code No: HS24

    Content:

The course relates to compliance with current legislation, including 'Working at Heights Regs. 2005' and identifies risk assessment/method statements, scaffold equipment, equipment inspections, on site inspections and maintaining an inspection register.

The course is provided through lecture, demonstration and practical exercises to demonstrate trainee competence.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness that scoffolding must only be erected by trained competent persons
  
• identify potential hazards, causation and prevention
• identify scaffolding components and use
• identify the requirements for inspection
  
• inspect the equipment for defects and report findings
• maintain an inspection register
  

    Prerequisites:

In line with sound company safety policy, all participants should be medically fit, have good eyesight and hearing and be able to work at heights.

    Participants:

Open - Maximum of 6

    Duration:

1 day

Title: Safe Handling of Airbags (SRS)

   Code No: HS25

    Introduction:

Air bag and seat belt pre-tensioners (Supplementary Restraint Systems - SRS) are now standard fitments in vehicles and, more frequently, the driver and passenger air bags are being supplemented with side and knee bags, curtains and even external devices.

Due to the pyrotechnic used in SRS devices, their deployment is an extremely energetic event. The accidental deployment of these units, by personnel required to handle or transport them, whilst rare, is potentially dangerous and therefore, a primary health and safety issue affecting those personnel.

This short course was developed, at the request of a leading vehicle manufacturer and in conjunction with an SRS manufacturer.

    Content:

The course is designed to provide essential product knowledge relating to the terminology used, identification of component types, how they function and understanding of the potential hazards.

This includes risk assessment and approved codes of practice associated with the storage and handling and controlled deployment of SRS, to enable personnel to operate competently and safely.

The course is provided through lecture, video and PC presentation.

    Objectives:

On completion of the course participants will be able to:

• demonstrate awareness of the potential hazards associated with SRS
  
• identify the main components of SRS devices
• describe the purpose and function of SRS units
• handle and store the units correctly and safely
• Identify a method of correct disposal of faulty units
• Define the associated terminology

    Prerequisites:

None

    Participants:

Open - Maximum of 8 -
Primarily aimed at technicians in development / test areas, trim assembly personnel, stores keepers and those transporting the components locally

    Duration:

1/2 day